We realise a lot of companies either have their own stock of hardware or cannot obtain LightAct hardware for various reasons.

That’s why we are growing a list of hardware manufacturers whose hardware solutions we’ve tested in our office and certified they are capable of running LightAct.

We call these hardware solutions that are not manufactured by us, Certified Hardware.

The certification is done in our office. The procedure is the same for every server and is as follows:

1. We check the component list and ensure it is of sufficient quality.
2. We make sure all the drivers and prerequisites are installed correctly.
3. We go through the entire Testing process as described on these pages.
4. We also check the build quality both on the inside and the outside of the server.
5. We ship the server back to the manufacturer so that they can create a disk image for later use.

It means that if you are unable to obtain LightAct hardware, you can get (or specify) one of the Certified Hardware platforms and know that LightAct is going to run on it perfectly.

No. The manufacturers of Certified Hardware design it by themselves and its specifications are different from our hardware.

We just test it to check if it is capable of running LightAct. 

It is manufacturer’s responsibility to ensure that the delivered server is set up as per our instructions.

Yes, all Certified Hardware comes with all the software LightAct offers. 

To be on the safe side however, make sure that your hardware provider installed the entire software suite before renting or buying it.

All Certified Hardware comes with either Pro or Partner license tier.

Contact the hardware Manufacturer for more information.

We don’t measure the performance of Certified Hardware. You should refer to the hardware manufacturer for more information.

For all the warranty and Terms of Sale questions, you should refer to the manufacturer of the Certified Hardware.

LightAct is responsible only for the software.

You should contact the manufacturers listed above directly.

LightAct is responsible for software support, the manufacturer of Certified Hardware is taking care of any hardware related support issues.

It is advised to contact the Manufacturer of the hardware first and they will redirect any software related queries onto us.